|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Data Sheet Features * * * * * * * Part Number 855833 1880 MHz SAW Split Band Filter * For PCS applications Usable bandwidth 30 MHz (each band) Low loss No impedance matching required for operation at 50 Single-ended operation Ceramic Surface Mount Package (SMP) Small size Package Surface Mount 3.0 x 3.0 x 1.22 mm Pin Configuration 1 2 3 1.22 NOM. 1.32 MAX. 0.69 8 4 3.00 7 6 5 3.00 0.60 0.60 Pad No. 1 3 5 7 2,4,6,8 Description Input band #1 Input band #2 Output band #2 Output band #1 Case ground 1.20 0.75 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 1 of 7 Data Sheet Operating Temperature Range: (2) Part Number 855833 1880 MHz SAW Split Band Filter Band #1 Electrical Specifications (1) -40 to +85 oC Parameter (3) Center Frequency Maximum Insertion Loss 1850 - 1880 MHz Passband Ripple 1850 - 1880 MHz Absolute Attenuation DC - 1770 MHz 1770 - 1800 MHz 1930 - 1960 MHz 1960 - 2040 MHz 2040 - 2100 MHz 2100 - 3000 MHz Input/Output Return Loss 1850 - 1880 MHz Terminating Source Impedance: (4) Terminating Load Impedance: (4) Operating Temperature Range Notes: 1. 2. 3. 4. Minimum 25 23 35 25 30 25 10 -40 Typical 1865 2 0.4 28 38 40 33 34 34 16.5 50 50 +25 Maximum 2.5 1.5 +85 Unit MHz dB dB p-p dB dB dB dB dB dB dB o C All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Band #1 Test Circuit: 1 3 5 2,4,6,8 50 50 50 Single-ended 7 50 50 No impedance matching required Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 2 of 7 Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Band #1 Typical Performance (at +25oC) Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 3 of 7 Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Band #2 Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Center Frequency Maximum Insertion Loss 1880 - 1910 MHz Passband Ripple 1880 - 1910 MHz Absolute Attenuation DC - 1800 MHz 1800 - 1830 MHz 1960 - 1990 MHz 1990 - 2040 MHz 2040 - 2100 MHz 2100 - 3000 MHz Input/Output Return Loss 1880 - 1910 MHz Terminating Source Impedance: (4) Terminating Load Impedance: (4) Operating Temperature Range Notes: 1. 2. 3. 4. Minimum 25 24 35 25 30 25 10 -40 Typical 1895 1.9 0.4 28 35 40 34 33 39 20 50 50 +25 Maximum 2.5 1.5 +85 Unit MHz dB dB p-p dB dB dB dB dB dB dB o C All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the optimum impedance in order to achieve the performance shown Band #2 Test Circuit: 1 3 5 2,4,6,8 50 50 50 Single-ended 7 50 50 No impedance matching required Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 4 of 7 Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Band #2 Typical Performance (at +25oC) Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 5 of 7 Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Matching Schematics 1 3 5 2,4,6,8 50 50 Band #1 7 50 Single-ended 50 50 No impedance matching required Band #2 50 Single-ended 50 50 1 7 2,4,6,8 3 5 50 50 No impedance matching required Marking Sawtek logo Marking code 1.39 PCB Footprint .96 L XXX Pad 1 ID dot Date code 3.20 SQ .81 .23 .81 .38 Date code is the day of the current year in 3-digit Julian format This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 O330 Sawtek logo 4.0 0.21 2.0 O1.5 A 1.75 5.5 Pad 1 ID dot O102 O20.2 O13.0 12.0 3.25 2.0 Direction of travel 1.4 Section A-A 3.25 4.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Last Updated: 14-May-2001 Page 6 of 7 Data Sheet Parameter Operating Temperature Range Storage Temperature Range RF Power Part Number 855833 1880 MHz SAW Split Band Filter Maximum Ratings Symbol T Tstg Pin Minimum -40 -40 - Maximum +85 +85 +12 Unit C C dBm o o Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips S-Parameters Qualification Flowchart Reel and Packaging Label Soldering Profile Other Technical Information Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Or contact one of our worldwide Network of sales offices, Representatives or distributors Last Updated: 14-May-2001 Page 7 of 7 |
Price & Availability of 855833 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |